Methods > Players and stream mixers > StreamVolumeSlide method

Remarks

Starts a volume sliding procedure that brings the current volume to a target volume in a given amount of time. You can know if a volume sliding is already being performed through the StreamVolumeIsSliding method.

During the sliding the FadingVolumeChanged event is generated every 15 milliseconds. When the volume sliding reaches the target volume, the VolumeSlideCompleted event is generated.

Syntax

[Visual Basic]

control.StreamVolumeSlide (

nPlayer as Integer,

nSlideDuration as Long,

fVolumeTarget as Single,

nScaleType as enumVolumeScales,

nCurveType as enumVolumeCurves,

nDesignerUniqueId as Long

) as enumErrorCodes

[C++]

short control.StreamVolumeSlide (

short nPlayer,

long nSlideDuration,

float fVolumeTarget,

short nScaleType,

short nCurveType,

long nDesignerUniqueId

);

Parameter

Description

nPlayer

Number representing the zero-based index of the involved player

nSlideDuration

The time required to perform the volume sliding from the current volume level to the target level set into the fVolumeTarget parameter below.

fVolumeTarget

Target volume reached when the sliding is completed; the meaning of this value depends upon the nScaleType parameter below.

nScaleType

The volume scaling type.

Supported values are the following:

Mnemonic constant

Value

Meaning

SCALE_LINEAR

The volume is based upon a linear scale and can be in the range from 0.0 (silence) to 100.0 (max volume)

SCALE_LOG

The returned volume, expressed in dB, is based upon a logarithmic scale and can be in the range from -100 (silence) to 0 (max volume)

The actual applied formula for converting a linear volume into a logarithmic volume is the following:

VolumeInDB = 20 * log10 (VolumeLinear/100)

The C syntax for converting a logarithmic volume into a linear volume is the following:

VolumeLinear = 100 * pow (10, VolumeInDB/20);

nCurveType

Type of curve applied to the volume sliding.

Supported values are the following:

Mnemonic constant	Value	Meaning

VOLUME_CURVE_LINEAR	1	Linear curve
VOLUME_CURVE_EXPONENTIAL	2	Exponential curve
VOLUME_CURVE_COSINE	3	Cosine curve
VOLUME_CURVE_SMOOTH	4	Smooth curve
VOLUME_CURVE_CUSTOM	5	Custom Bézier curve.

nDesignerUniqueId

Unique identifier of the curve editor control containing custom curve settings to apply. This unique identifier is returned by a previous call to the VolumeAutomation.CurveDesigner.Create method.

The custom curve designer manages a windowed control, whose visual aspect can be defined programmatically, which allows designing volume curves based upon Bézier curves whose shape is defined through the manual positioning of 2 control points (displayed in cyan color on the graphic below). For further information about the use of the embedded CurveDesigner refer to the tutorial How to create custom volume curves.

amp3dj_i00009a

This parameter is ignored if the nScaleType parameter above has been set to a value different from VOLUME_CURVE_CUSTOM.

If you don't want to display the custom curve designer on your user interface but you know the exact position of the control points to set, you can use the StreamVolumeSlideEx method.

Return value

Value	Meaning

Negative value	An error occurred (see the LastError property for further error details)
enumErrorCodes.ERR_NOERROR (0)	The method call was successful.