Methods > Recorders > StartSplitFromDirectSoundDevice method

Remarks

Starts a recording session through the given input device and channel.

Calling this method will cause the control to fire a RecordingStarted event. The recording session can be stopped at any time through a call to the Stop method.

During the recording session you can be notified about recorded size for both channels through the RecordingSizeSplit event.

In this case the recording session wouldn't be kept inside the RecordedSound object so the only accepted recording mode, set through the SetRecordingMode method, is REC_MODE_NEW.

If the EncodeFormats.ForRecording property is set to ENCODING_FORMAT_WMA, the only supported encoding mode for the EncodeFormats.WMA.EncodeMode property is WMA_ENCODE_CBR_STD_16 and the WMA.CBR property must be set to a value that can support both stereo and mono, so the only compatible combinations are the following:

•	for sounds at 16000 Hz CBR must be set to 16000 (16 kbps)

•	for sounds at 22050 Hz CBR must be set to 20000 (20 kbps)

•	for sounds at 44100 Hz CBR must be set to 32000 (32 kbps) or 48000 (48 kbps)

If the EncodeFormats.ForRecording property is set to ENCODING_FORMAT_WAV, the splitting will only work if the EncodeFormats.WAV.EncodeMode property is set to a format supporting both mono and stereo formats meaning that, for example, it will not work for mono-only formats like WAV_ENCODE_GSM_610 or WAV_ENCODE_G721_ADPCM_32.

If the EncodeFormats.ForRecording property is set to ENCODING_FORMAT_AIFF, the splitting will only work if the EncodeFormats.AIFF.EncodeMode property is set to a format supporting both mono and stereo formats meaning that, for example, it will not work for mono-only formats like AIFF_ENCODE_GSM_610.

If the EncodeFormats.ForRecording property is set to ENCODING_FORMAT_AU, the splitting will only work if the EncodeFormats.AU.EncodeMode property is set to a format supporting both mono and stereo formats meaning that, for example, it will not work for mono-only formats like AU_ENCODE_G721_ADPCM_32 or AU_ENCODE_G723_ADPCM_24 or AU_ENCODE_G723_ADPCM_40.

If the EncodeFormats.ForRecording property is set to ENCODING_FORMAT_ACM, the splitting will only work if the selected codec supports both mono and stereo formats meaning that, for example, it will not work for mono-only codecs like GSM 6.10 or G721 ADPCM.

The split doesn't work if the EncodeFormats.ForRecording property is set to ENCODING_FORMAT_AAC because this format doesn't support creating mono sounds.

For details about the encoding format and parameters applied during recording see the How to perform a recording session section.

Syntax

[Visual Basic]

control.StartSplitFromDirectSoundDevice (

nInputDevice as integer,

nInputChannel as integer,

strOutputPathLeft as string,

strOutputPathRight as string

) as enumErrorCodes

[C++]

short control.StartSplitFromDirectSoundDevice (

short nInputDevice,

short nInputChannel,

LPCTSTR strOutputPathLeft,

LPCTSTR strOutputPathRight

);

Parameter	Description

nInputDevice	Number representing the zero-based index of the DirectSound input device (sound card) that will be used for recording. Use the value returned by the GetInputDevicesCount method in order to know how many input devices are currently installed on the system and the GetInputDeviceDesc method in order to retrieve the friendly name of each input device. If the multimedia engine shouldn't find any enabled or valid input or output device, the container application would be notified through the WarnNoInputDevice and WarnNoOutputDevice events.
nInputChannel	Number representing the zero-based index of the input channel (Microphone, Stereo Mix, Line-In, etc.) that will be used for recording on the input device set through the nInputDevice parameter (use -1 for setting the system default input channel).
strOutputPathLeft	String representing the absolute pathname of the destination file that will contain the left channel of recorded data. If this pathname should contain invalid characters, they would be automatically changed into an underscore '_' character.
strOutputPathRight	String representing the absolute pathname of the destination file that will contain the right channel of recorded data. If this pathname should contain invalid characters, they would be automatically changed into an underscore '_' character.

Return value

Value	Meaning

Negative value	An error occurred, check the LastError property value in order to see the error code meaning
enumErrorCodes.ERR_NOERROR (0)	The method call was successful.