Copyright © 2008-2019 MultiMedia Soft

AppendAutomationItemAddFromFileRaw method

Previous pageReturn to chapter overviewNext page

Remarks

 

Adds a sound file in RAW format, or a portion of the sound file, taken from a given pathname to the append automation list.

 

For further information about management of append automation sessions refer to the How to mix or append several sounds in one single shot tutorial.

 

 

Syntax

 

[Visual Basic]

Public Function AppendAutomationItemAddFromFileRaw (

strPathname as String,

nEncodeMode as enumRAWEncodeModes,

bIsBigEndian as Boolean,

nFrequency as Int32,

nChannels as Int32,

nStartPosition as Int32,

nEndPosition as Int32,

fVolume as Single

) as enumErrorCodes


 

[C#]

public enumErrorCodes AppendAutomationItemAddFromFileRaw (

string strPathname,

enumRAWEncodeModes nEncodeMode,

bool bIsBigEndian,

Int32 nFrequency,

Int32 nChannels,

Int32 nStartPosition,

Int32 nEndPosition,

float fVolume

);


 

[C++]

public: enumErrorCodes AppendAutomationItemAddFromFileRaw (

string strPathname,

enumRAWEncodeModes nEncodeMode,

bool bIsBigEndian,

Int32 nFrequency,

Int32 nChannels,

Int32 nStartPosition,

Int32 nEndPosition,

float fVolume

);


 

 

Parameter

Description

 

 

strPathname

String representing the absolute pathname of the source sound file.

nEncodeMode

Encode mode used to encode the RAW file.

Supported values are the following:

Mnemonic constant

Value

Meaning

RAW_ENCODE_PCM_U8

0

RAW PCM 8 bits Unsigned

RAW_ENCODE_PCM_S8

1

RAW PCM 8 bits Signed

RAW_ENCODE_PCM_S16

2

RAW PCM 16 bits Signed

RAW_ENCODE_PCM_S24

3

RAW PCM 24 bits Signed

RAW_ENCODE_PCM_S32

4

RAW PCM 32 bits Signed

RAW_ENCODE_FLOAT32

5

RAW 32 bits floating point

RAW_ENCODE_G711_ULAW

6

RAW G711 U-LAW

RAW_ENCODE_G711_ALAW

7

RAW G711 A-LAW

RAW_ENCODE_GSM_610

8

RAW GSM 6.10

RAW_ENCODE_DIALOGIC_VOX

9

RAW Dialogic ADPCM VOX

bIsBigEndian

Boolean flag that specifies if bits order inside the RAW file are little-endian or big-endian

Supported values are the following:

Value

Meaning

false

The RAW file is encoded using little-endian

true

The RAW file is encoded using big-endian

nFrequency

Sample rate of the RAW file (e.g. 44100)

nChannels

Number of channels of the RAW file: 1 for Mono or 2 for Stereo

nStartPosition

Start position, expressed in milliseconds, of the range to load from the added sound file

nEndPosition

End position, expressed in milliseconds, of the range to load from the added sound file

fVolume

Volume level applied to the added song when it will be appended.

Supported values are expressed with a linear volume in the range from 0 to 100. In case you should need to set a volume expressed in dB, before setting this parameter you could convert the value in dB into a linear value through the following formula (C syntax):

VolumeLinear = 100 * pow (10, VolumeInDB/20);

 

 

Return value

 

Value

Meaning

 

 

Negative value

An error occurred. Check the LastError property value in order to see the last error.

enumErrorCodes.ERR_NOERROR (0)

The method call was successful.